Terävä Mini-Skrama bare tang
A very small and handy little Skrama-like bare tang knife, or neck knife if you will. Easy to carry and great for all those small tasks that you come across most often.
- Very small size, easy to carry and handle. Great companion for a large chopper or axe.
- Skrama-like sheepsfoot blade profile.
- A notch at the root of the blade to ease sharpening over years of use and maintenance.
- Spine ground and beveled to strike sparks from ferro rods.
- Simple and functional bare tang grip, the user can add cordage etc. if desired.
|Weight||95 g||3.35 oz|
|Blade length||80 mm||3.15"|
|Blade thickness||3,25 mm||0.128"|
|Steel||80CrV2, 59 HRC|
The steel and heat treatment
80CrV2 carbon steel is used in all our carbon steel knives. The thing is that it's nothing special really, just really good tool steel that can take basically any beating and offers great edge retention.
The heat treatment we use leaves the surface of the steel softer than the inside. This actually functions a lot like fancy differential heat treatments making these knives very tough. As the surface is softer, any microscopic fractures or unevennesses in the steel will not cause problems like they would if the steel was hardened all the way through. The end result is virtually zero problems caused by material defects!
The heat treatment and softer surface is also why we have added the bevels to the spine, a simple polished spine was not enough for use with ferro rods but with these little bevels that bare the inner, harder steel we get a spine that strikes ferro rods real well!
All Terävä knives are manufactured in Kauhava, Finland, by our partners at Laurin Metalli, Finlands leading knife blade manufacturer with roots going back to 1918. A Terävä blade is Finnish craftsmanship, pure and simple! And "Terävä", that's just Finnish for "sharp".
Terävä Mini-Skrama bare tang leather sheath
Terävä Mini-Puukko bare tang
Terävä Mini-Skrama, carbon steel
Terävä Skrama plastic sheath
Terävä Mini-Puukko, carbon steel
Terävä Mini-Puukko bare tang leather sheath
Terävä Skrama blade, carbon steel, w/o rubber grip
Woodsknife Wiking 1 62
Terävä Skrama leather sheath
Terävä Jääkäripuukko, carbon steel
Paracord, 15 m
Wästikivi Eräkivi whetstone
Paracord, 30 m
You have already submitted a review. You can edit your text by clicking on it.
Log in and write a review.
Simo H. 08.02.2017
Perfect project knife.
Leave the tang bear, get some Kydex and make it into a necker.
Buy a belt sheath and wrap it in paracord for a light duty belt knife.
Shove G10 plates on the tang, make some sort of whacky molle platform plastic thing for your body armour and have an unusual last ditch defense blade.
Make it what you want it to be.
Aaron F. 20.05.2018
Rodger P. 10.08.2018
Juha R. 26.06.2019