Särmä TST RK Open Top magazine pouch

17.99 EUR
Särmä TST RK Open Top magazine pouch
Trouble with the metric system? Try our converter:
cm = 0' 0" or 0" and
feet  inches = 0 cm

We suggest you get these too

Särmä TST Tri-tab for shock cord

Särmä TST Tri-tab for shock cord

2.99 EUR

A Y-shaped tri-tab, just like those found on many AK open-top magazine pouches but better. This little buddy is special though, made from Protan (a super strong PVC-rubberized material) it keeps it´s shape real well and offers great friction, these properties make it a great shock cord retainer for open top magazine pouches. Finnish MILSPEC quality

These might also interest you

Finnish M05 double magazine pouch

Finnish M05 double magazine pouch

25.99 EUR

A magazine pouch of the new Finnish M/05 load carrying system. Fits two RK/62 plastic magazines. Closes with a "Spanish Fly" buckle and velcro.

Verseidag Tacticum Plate Carrier

Verseidag Tacticum Plate Carrier

376.99 EUR

Current issue Finnish army special forces plate carrier. This is an interesting mix of well proven ideas (such as Cryes zipper panels) stuffed into a Finnish design. Ballistic plates sold separately!

Särmä TST Chestrig SF

Särmä TST Chestrig SF

69.99 EUR

A 2-piece split front chest rig, a simple and versatile rig that functions well in a multitude of uses. Map pouches inside the panels, attachment points for small gear or hydration tubes on the shoulder straps. Enough PALS space to carry most loads. >Finnish MILSPEC quality!

Särmä TST Admin-2 pouch w/ side pocket

Särmä TST Admin-2 pouch w/ side pocket

29.99 EUR

Everybody needs their own "field office", this admin pouch is a tried and tested common design, two flat compartments and a tool pocket on the outside. Fits all your little notebooks etc. and has generous velcro for name, rank and silly "Cock Sucking Crusader" patches on the front. On the side we have a separate compartment for tools or a tourniquet. Finnish MILSPEC quality!

Särmä TST Tourniquet pouch

Särmä TST Tourniquet pouch

19.99 EUR

An extremely simple tourniquet pouch, made from extremely strong military webbing with a quick and easy to use velcro flap. A true "Keep It Simple, Stupid" design, it doesn´t get much more simple and functional than this. Fits the most common military tourniquets (CAT, SOF-T etc.). Finnish MILSPEC quality!

Särmä TST Dump pouch, green

Särmä TST Dump pouch, green

25.99 EUR

Simplicity is beautiful, even more so when it works properly. This dump pouch is cleverly made out of a single piece of 1000D Cordura, simple and tough, the construction also makes the pouch keeps it´s shape exceptionally well without any hard plastic stiffeners! Designed to store a handful of RK/AK magazines, works very well as pistol dump too. Finnish MILSPEC quality!

Särmä TST Dump pouch, M05 woodland camo

Särmä TST Dump pouch, M05 woodland camo

29.99 EUR

Simplicity is beautiful, even more so when it works properly. This dump pouch is cleverly made out of a single piece of 1000D Cordura, simple and tough, the construction also makes the pouch keeps it´s shape exceptionally well without any hard plastic stiffeners! Designed to store a handful of RK/AK magazines, works very well as pistol dump too. Finnish MILSPEC quality!

Särmä TST Chestrig STD

Särmä TST Chestrig STD

69.99 EUR

The STD (as in standard. not venearal diseases) is a chest rig in it's most common shape form. Single piece construction with internal map pouch, attachment points for small gear or hydration tubes on the shoulder straps. 4x14 PALS webbing, enough to carry most fighting loads. >Finnish MILSPEC quality!

Finnish RK plastic magazines are bulkier than most other AK type mags, and much fatter than any STANAGs, this naturally leads to troubles finding suitable open-top mag pouches. Well those worries are now in the past, this pouch is made to fit a single RK plastic mag, modelled after the thoroughly proven conventional open-top design with a few tweaks. Finnish MILSPEC quality!

As the Finnish RK is of Soviet descent so is it's magazines, the typical front and rear locking lugs can be a pain in the ass for open-top mag pouches. This is why ours is made from double layered 1000D Cordura, the construction leaves the interior of the pouch totally clean off any folds or other features that might catch on to the locking lugs. The double layered Cordura also theoretically doubles the lifespan of the pouch.

Also the fit of the pouch has been given some tought, these are not nearly as tight as most open-tops, not floppy either but just perfect not to have the sides press tightly against the locking lugs. In a tight pouch the sharp angles of the lugs would quickly eat through even the strongest fabrics. The rubber cord that keeps the mag in place is really tough stuff, so even if the pouch is not condom-tight you don't need to worry about your mags falling out.

Naturally any 7,62x39 mm Kalashnikov magazine will fit nicely. Steel and bakelite mags may be a bit loose fitting, but Bulgarian and Russian plastics fit just as nicely as the Finnish RK mags.

And of course the front of the pouch also has PALS webbing for attaching another pouch on top, a good feature especially when your vest platform is running out of space.

Drainage hole on the bottom, naturally. The construction is waterproof enough to keep water inside, and that we don't want happening.

Finnish MILSPEC materials

These pouches are made from the same materials (1000D Cordura, polyamide webbing) that are used in the production of the Finnish military M05 combat equipment.

Varusteleka Särmä TST

Särmä TST is our own family of specialized military gear. All Särmä TST stuff is made in co-operation with Finnish military manufacturers, the most important thing for us is high quality MILSPEC grade materials and construction. This is kit that you can trust to really take a beating! Check out the rest too: Särmä TST.

Made in Finland/Estonia

These are made by Finn-Savotta Oy, our subcontractor for all Särmä TST field gear. Materials are cut and prepared in Finland, assembled in Estonia. This is because of two reasons: first of all Finn-Savottas production schedules are so packed full of huge military orders that we'd have to wait months to get these sewn in Finland. The second thing is that this way we can cut the retail price by a third! Quality wise these are the same as Savotta's Finnish sewn stuff, so no worries there.

Log in and write a review.

Comments


Loading...