Särmä TST PC18 Plate Bags

These plate bags are the starting point to assemble your own PC18 plate carrier. Designed to be compatible with numerous industry-standard accessories.

• Designed for 254 x 305 mm (10" x 12") plates, max. thickness 28 mm (1.1")
• Body side made from slightly stretchy Cordura
• Loop surface on the body side for cushion attachment/li>
• Plates are inserted through hook-and-loop slots on the bottom
• Low profile shoulder straps with hook-and-loop adjustment
• Front details:
• Four channels wide PALS webbing
• 10x15 cm loop for patches
• Front panel attachment tabs (SwiftClip etc. compatible
• Loop for attaching cummerbunds and front panels
• Four Velcro One-Wrap loops on the sides
• Rear details:
• 4-6x6 PALS webbing
• 10x15 cm loop for patches
• Flap covered loop for cummerbund attachment
• Materials:
• 1000D Cordura/Foxdura
• Cordura stretch fabric
• Velcro hook-and-loop
• PES webbing
• All visible materials are NIR compliant

The shoulder straps are connected and adjusted using hook-and-loop, which are sewn in two pieces to each of the shoulder straps. This two-piece construction allows S/M size users to cut off the excess length of the shoulder straps if desired.

The front panel attachment loops are compatible with PC18 accessories and numerous SwiftClip placards and chest rigs from other manufacturers. The hook-and-loop closure on the bottom of the plate bags can be used to attach various hanger accessories. The easy-to-use Velcro One-Wrap loops on the sides of the front panel help keep your antennas, cables, and drinking tubes organized.

Finnish MILSPEC materials

Green and M05 woodland camo

Made of the same materials and hardware (1000D Cordura, PES webbing, ITW Nexus buckles etc.) that are used in the production of the Finnish military M05 combat equipment. High quality, NIR compliant etc.

M05 snow camo

M05 snow camo gear fabric is Foxa's 1000D Foxdura. Webbing is made in Finland, by Finn-Nauha. All materials are NIR compliant.

Made in the EU

The green and M05 woodland camo products are manufactured in co-operation with Finn-Savotta Oy (Finland's leading military and outdoors gear manufacturer and the main load-bearing equipment contractor for the Finnish Defence forces). Depending on the situation production runs are sewn either in Savotta's Finnish or Estonian factory, sometimes even partially in Finland and partially in Estonia. The little printed tags tell where exactly each particular product was sewn. The M05 snow camo products are made in the Czech Republic by Finnish CPE.