Särmä TST CP15 Combat pack

A compact 15-litre combat pack, highly adaptable to suit user's individual needs. Lots of options for added carrying capacity and organization topped off with modular shoulder straps. Absolutely bombproof construction and materials!

Practical and minimalistic

The features of the CP15 Combat Pack reflect the intended use, but this kind of packs are excellent for daily use and small trips as well.

• Zipper closure all the way down
• Two G-hook compression straps per side
• Two zippered mesh pockets inside
• Loop surface inside for pouch/accessory attachment
• Three accessory attachment or tie-down loops inside
• Outer compartment against the back, bellows into the main bag
• PALS webbing on all three sides and bottom
• 20 x 10 cm (8" x 4") loop base for patches
• Carry handle with antenna/tube ports on the sides
• Hip belt can be tucked away
• Attachment loops for plate carrier adapters
• Attachment points of shoulder straps on the top and bottom corners

Technical specifications

• Dimensions 44 x 24 x 15 cm (17" x 9.5" x 6")
• Volume 15 liters (915 cu in.)
• Weight approx 950 g (33.5 oz)
• 1000D Cordura, NIR compliant

Modular shoulder straps

The shoulder straps are separate from the main bag, so you can choose which ones you need and prefer. They attach to steel D-rings found on the main bag at the top and bottom.

Flat, made from webbing is more economical. The unpadded construction is very low profile to minimize bulk and interference when shouldering rifles

Firm, padded and shaped offers an anatomic and comfortable fit for extended use with heavy loads.

You can also choose to buy just the main bag without shoulder straps in case you have plans to attach it to your plate carrier for example. You can also mix and match the colours this way, how convenient!

Finnish MILSPEC materials

Made of the same materials and hardware (1000D Cordura, webbing, ITW Nexus buckles etc.) that are used in the production of the Finnish military M05 combat equipment. High quality, NIR compliant etc.

Made in Finland and Estonia

These manufactured in co-operation with Finn-Savotta Oy (Finlands leading military and outdoors gear manufacturer and the main load bearing equipment contractor for the Finnish Defence forces). Depending on the situation production runs are sewn either in Savotta's Finnish or Estonian factory, sometimes even partially in Finland and partially in Estonia. The little printed tags tell where exactly each particular product was sewn.