Varusteleka LVPC Plate Bags

From 179,99 €
Available
Product details
Product description

For missions where at least some phases require blending in: These LVPC plate bags are the starting point for assembling your Low-Vis Plate Carrier. With a streamlined cut and careful detailing and material choices, the LVPC conforms to the shape of the plate to prevent hot spots that would print through a jacket. Compatible with numerous industry-standard accessories and components.

  • Sleek and lightweight design, just 340 g / 12 oz
  • 3D Mesh lining for moisture management
  • Adjustable low-profile shoulder straps
  • Laser-cut slots for modularity beyond PALS

The plate bags are designed for 254 x 305 mm / 10" x 12" plates with a thickness of up to 28 mm / 1.1". Smaller and thinner plates are held steady with an integrated strap adjustment.

Many layers of webbing, fabric, and hook-and-loop have been eliminated by integrating a 2-ply Foxdura 500D laminate exterior (M05 Woodland) with a 3D Mesh liner and nothing but your plates of choice in between. You'd have to duck tape the plates to your body to reduce the thickness of your carrying system. The Ranger Green and MultiCam LVPC plate bag exterior is made of Cordura 500D.

The fabric's NIR properties are Mil-Spec.

Accessory options

The bare minimum you need to make a Plate Carrier out of these is a cummerbund. The Low-Vis concept is maintained with the Särmä TST Elastic Mag Pouch Cummerbund featuring three large pouches and a smaller one on each side. The LVPC is compatible with all cummerbunds that attach to a loop base on the back.

You can add capacity with minimal bulk with a Särmä TST Low-Vis Mag Shingle featuring three large pouches and smaller ones on each side. The LVPC is compatible with industry-standard placards with G-Hooks, SwiftClips, etc..

Loaded placards and other pouches can be carried in a bag when the nature of your mission should not be immediately obvious. Mount them to the carrier when the job turns from Low-Vis to a Direct Action kind of deal.

The laser-cut PALS slots match the width of 25 mm / 1" webbing more closely and keep your pouches more stable. Additional upright slots on the front piece are compatible with QASM buckles, G-Hooks, and so on.

Made in the EU

The LVPC plate bags are made in Bulgaria by PGD.

Reviews
4.3(2)

Jan P.

17.07.2024Verified purchase
Good plate carrier. I am pretty happy with it, the only downside is that adjusting it to your size can be a pain in the ass.

Sharif S.

26.04.2024Verified purchase
Sleek and neat plate carrier when you want a low vis pc without any nonsense. The best thing is that you can modify it exactly how you want without any unnecessary bulk, for example elastic mag pouch cummerbunds is highly recommended. On the negative side is the tiny size (for bigger guys) and very snug plate pockets - I couldn't fit 1" ceramic plates just because the edge reinforcement is over 1" thick. Only thin steel 10x12" plates fit perfectly (under 1" thick), but it must be a SAPI (or shooters) cut, not rectangular ones. And this is exactly why this plate carrier MUST be upgraded to fit even a larger size up to 26x34cm / 11x13,25" plates (SAPI Large)!

Myymälä

Hankasuontie 11 A
00390 Helsinki

Ma-Pe 10:00-20:00
La 10:00-19:00
Su 12:00-17:00

Poikkeukset aukioloaikoihin löydät Myymälän sivulta.

Seuraa meitä

Propaganda

Tilaa sähköpostiisi Varustelekan Propagandaa ja pysy valveutuneena! Propaganda sisältää hyödyllistä tietoa, neuvoja, enemmän tai vähemmän hauskoja kirjoituksia siitä mitä meillä tapahtuu sekä tietysti vain propagandakirjeen tilaajille rajattuja tarjouksia.
Tilaamalla uutiskirjeen hyväksyt tietojesi käsittelyn Tietosuojaselosteemme mukaisesti.

Ota yhteyttä

Tel: +358 10 320 3813

[email protected]

Ma-Pe klo 08:00-20:00
La klo 10:00-18:00
Su klo 10:00-18:00

Lue lisää Yhteystiedot-sivulta.

Turvalliset maksutavat

Toimitustavat

Copyright © 2024 Varusteleka Oy | Y-tunnus 2082907-8