Fenix TK11R Rechargeable Flashlight

The popular tactical flashlight TK11 is now rechargeable, indicated by the letter R at the end! This is a compact flashlight with tactical features and a brightness of 1600 lumens, suitable for searching for scoundrels or lost individuals. It also works great for civilian purposes, e.g. in the bush, as a work light, and for demanding general use. The flashlight produces a maximum beam distance of 420 meters, is resistant to water, dust, and impacts – and it comes with a rechargeable battery and charging cable. The charging is done directly from the side of the flashlight. The battery does not need to be removed for charging.

Included in the Package

• Fenix TK11R rechargeable tactical flashlight
• Fenix ARB-L18-3400 li-ion battery
• USB-C charging cable
• Belt holster and wrist strap
• Replaceable O-ring seal
• User manual

Features

• 3 brightness levels plus strobe
• Battery status indicator with a clear LED light
• Reverse polarity protection
• USB-C rechargeable
• Stainless steel belt clip
• Material A6061-T6 aluminum with scratch-resistant hard-anodized coating (HAIII)
• 5-year manufacturing defect warranty for the flashlight, 1 year for the battery
• Made in China

Fenix E35R operates with a single 3400 mAh 18650 Li-ion battery. The battery can be charged directly from the USB Type-C charging port without being removed. A full charge takes about 3.5 hours. When the battery is not being charged, the remaining charge level is easy to check with the LED indicator that lights up for a few seconds when the light is turned on.

Battery level indication LED:

• Green: Over 85 %
• Flashing green: 85-50 %
• Red: 50-25 %
• Flashing red: Under 25 %

During charging, the light is red until it turns green, indicating a full charge.

While it is not recommended, you can use a CR123A battery as an emergency option. Do not try to charge a CR123A or 16430 battery. The battery level indication system only works with a Fenix ARB-L18 battery.

The flashlight comes with a detachable stainless steel belt clip, allowing you to clip the flashlight conveniently onto your belt or pocket, etc. The remaining battery charge can be easily checked with an LED indicator that lights up for a few seconds when the light is turned on.

The flashlight is completely IP68 dust and waterproof. All Fenix flashlights are tested in Fenix's own laboratory according to the American ANSI/FL1 standard.

Instructions

There are two buttons on the back of the flashlight, a larger one and a smaller one. Press the larger button to turn the light on and off. Click the button all the way down, and the light will stay on with the last-used brightness level, excluding strobe. With the light on, pressing the smaller button changes the brightness level (low-medium-high). With the light off, holding down the smaller button activates the strobe. When the light is on, holding down the smaller button for a moment keeps the strobe continuously on, and a quick tap turns it off. The continuous strobe turns off by pressing the larger button.

The flashlight will heat up when used at high levels for an extended period. When the temperature of the flashlight exceeds 65°C / 149°F, the light automatically dims to reduce the temperature. Once the light cools down below 65°C / 149°F, the brightness returns to normal.

Technical Specifications

• Brightness: max. 1600 lm
• Runtime: max. 25.5 h (low mode)
• Maximum beam distance: 420 meters
• LED type: Luminus SFT40 LED, lifespan 50,000 hours
• Power source: 1 x 3400 mAh 18650 Li-ion battery
• Impact resistance: 1 m
• Waterproof: IP68 (completely dust and waterproof up to 2 meters)
• Approvals: ANSI/NEMA FL-1, ROHS, CE
• Dimensions: 146 x 34 x 24 mm
• Weight without battery: approx. 118 g

Power Modes

* The high output is measured in total runtime including output at reduced levels due to the built-in temperature protection mechanism.

Product Video